Automatic tray washing machine
BTA 160, BTA 240
Technical Data

Advantages

Quick, effective and cost-efficient tray washing
No manual handling of trays necessary thanks to transfer from conveyor
Powerful washing system for a maximum cleaning result above and below the trays
First class drying results
Stacking device enables quick and safe changeover of tray stackers without disruption

BTA 160 Automatic Tray Washing Machine

The tray washing machine BTA 160 automatically washes up to 16 trays per minute with exceptional washing and drying results.

more details

This automatic tray washing machine features a powerful washing system located both above and below the tray to maximise the cleaning result. This is followed by an intensive hot fresh water final rinse of each tray. To ensure a first class drying result the tray transport cords of the BTA tray washer are separated between the final rinse section and the drying zone. Trays are therefore transported on „dry“ round belt cords when in the drying zone for a optimal drying performance.

Measurements

	Standard
Technical data
Drying/air circulation	200 m³/h
Performance
Wash capacity	16 trays/min
Pump motor	1,1 kW
Tank capacity	60 l
Final rinse	150 l/h
Blower motor	4 kW
Built-in boiler
40°C feed water temperature	13,9 kW
10°C feed water temperature	17,6 kW
Total connected load
10°C feed water temperature without heat recovery system	39 kW
10°C feed water temperature with heat recovery system	33 kW
40°C feed water temperature	29 kW

BTA 240 Automatic Tray Washing Machine

The compact construction of the BTA 240 tray washing machine can wash and dry up to 24 trays per minute automatically.

more details

The compact construction and the exceptional price/performance ratio makes the BTA 240 automatic tray washing machine a must have! Trays no longer need to be picked-up and placed on the washing machine belt manually, keeping costs lower with shorter washing-up times, reduced working hours and less energy consumption.

The optional heat recovery condensing system uses the otherwise extracted steam vapours for the pre-heating of the incoming cold water supply, whilst considerably reducing the humidity and temperature of the remaining exhausted air. (Also available for the BTA 160.)